Stone Guard Automotive Protective Tape by Tenacious Tapes. Adhesive tape comparable to 3M Polyurethane Protective Tape 8671P or Stylus 8300. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: 6mm to 1000mm in 25 Metre Lengths
Adhesive: Solvent Acrylic
Description: A special, soft, clear vinyl coated with a high tack, permanent acrylic adhesive and supplied on a white 144g/M² siliconized PE Kraft paper liner.
Application: Designed for the permanent protection of surfaces, particularly from chip, scuff and abrasion. Its primary application is for use in the automotive sector for protecting paintwork, bumpers and headlights from stone chips and road debris. Other common applications include: protection of bike frames, marine for jet skis, paddle boards etc. and applications in industrial situations to permanently protect surfaces from mechanical damage.
|Breaking Load:||38 N/cm|
|Elongation at Break:||200%|
|Adhesion to Steel:||6.4 N/cm|
|Service Temperature:||-20°C to 140°C|
|Storage Temperature:||15°C to 25°C|
|Shelf Life:||12 Months|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.