Colour: Light Yellow
Roll Size: Standard length 55 metres by required width
Adhesive: Rubber Natural
Description: An ivory coloured tensilised MOPP film tape. It has a high performance synthetic rubber based adhesive. This product has been specially designed for demanding applications, such as those that are found in the appliance industry and offers excellent clean removal. It is also an excellent product for strapping, tabbing and palletising applications. The A820 provides excellent moisture and stain resistance and has very good low temperature performance.
Application: For use in the appliance and furniture industries for holding and securing where clean removal and non-staining properties are required for securing doors, shelving, drawers etc. Tabbing and securing of metal coils (offers re-cycling benefits over filament type tapes). General strapping, bundling and securing applications.
|Tape Thickness PSTC-33 :||0.127mm|
|Breaking Load PSTC-31:||254 N/cm|
|1800 Peel Adhesion PSTC-1:||6.05 N/cm|
|Quick Stick PSCT-5:||3.28 N/cm|
|Elongation at Break PSTC-31:||35%|
|Service Temperature:||5ºC to 82ºC|
|Storage Temperature:||15ºC to 25ºC|
|Shelf Life:||12 Months|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.