PVC Floor Marking Tape by Tenacious Tapes. Adhesive tape comparable to 3M 5702, Tesa 6897 Safety Warning Tape, Nito 21, Stylus 471 or Husky 557 – PVC lane marking tape. Order online from exclusive approved supplier Wayout Evacuation Systems.
Colour: White, Yellow, Blue, Black, Green, Orange and Red
Roll Size: Widths 6mm to 1300mm in 33 Metre lengths
Adhesive: Rubber Natural
Description: heavy duty plasticised PVC film, coated with a white aggressive pressure sensitive adhesive.
Application: Factory demarcation areas, sports court markings. AT8S (Safety Tapes) helps employers meet their new statutory obligations under the Health and Safety at Work Act, i.e. first aid points, fire fighting equipment, hazardous areas.
|Breaking Load:||26 N/cm|
|Elongation at Break:||150%|
|Adhesion to Steel:||3.6 N/cm|
|Adhesion to Self:||2.5 N/cm|
|Water Extract:||pH 6.0 to 8.0
Conductivity Max. 2.5 mS/m
|Service Temperature:||0°C to 60°C|
|Application Temperature:||5°C to 40°C|
Specification: Certification to the following standards may be available on request. BS3887 : 1991 all colours .
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pres-sure in order to achieve maximum adhesion levels. The recom-mended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note:The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.