Photographic Masking Tape by Tenacious Tapes. Adhesive tape comparable to 3M 235 Tape, Tesa 4325 or Stylus SPT43. Order online from exclusive approved supplier Wayout Evacuation Systems.
Colour: Matt Black
Roll Size: 6mm to 1440mm in 55 Metre Lengths
Adhesive: Rubber Synthetic
Description: Opaque, matte-surface, a professional photographer’s masking tape with a rubber pressure sensitive adhesive.
Application: Engineered for quality photographic reproduction work – cropping and edging negatives, positioning negatives for con-tact printing, sealing camera bellows and film holders against light leakage. For use in film processing laboratories, photo studios and also for use as a chart tape. Highly conformable and easily torn with no “pin holes”.
|Elongation at Break:
|180° Peel Adhesion:
|0°C to 70°C
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 30ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.