Colour: Black & Grey
Roll Size: From 6mm to 1220mm in 18 metre rolls
Adhesive: Acrylic Modified
Description: Calendered resilient vinyl film on a PET backing with a modified acrylic adhesive and a Poly coated heavy weight white paper liner.
Application: For use on a range of smooth surfaces (primarily indoors) to reduce the risk of slipping and slip injuries.
|Thickness:||1.2mm (+/- 0.2mm)|
|Breaking Load:||75 N/cm|
|Elongation at Break:||100%|
|Adhesion to Steel:||Immediate: 4.8 N/cm
24 Hours: 5.9 N/cm
|Service Temperature||-5°C to 50°C|
|Storage Temperature||15°C to 25°C|
|Shelf Life:||12 Months|
** Manufactured under ISO 9002/CNS 12682
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.