Roll Size: 6mm to 1300mm in 25 Metre Lengths
Adhesive: Rubber Natural
Description: A fine grade close weave cloth carrier with a rubber based slightly differential adhesive system for many applications. A critical feature of this product is its clean remove characteristics from most stable surfaces.
A general purpose cloth for most jobs
Signage & Display, adheres to Corflute/Corex
Plate mounting in the print industry
|Breaking Load:||56 N/cm|
|Adhesion to Steel:||Open Side: 4.7 N/cm
Closed Side: 7.0 N/cm
|Service Temperature:||-10°C to 60°C|
|Storage Temperature:||15°C to 25°C|
|Shelf Life:||12 Months|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.