Double Sided Foamed Acrylic – Bonding Tape T716GX by Tenacious Tapes. Adhesive tape comparable to 3M 4956, 3M 4957, Tesa 7066ACX or PPC 5200. Order online from exclusive approved supplier Wayout Evacuation Systems.
Roll Size: 6mm to 930mm in 33 Metre Lengths
Adhesive: Acrylic Foamed Acrylic Modified
Description: A Grey 1.6mm Foamed Acrylic Tape designed for applications where a very high permanent bond is required. A high performance foamed acrylic adhesive. High density version for improved die cutting characteristics. It is plasticiser and UV resistant, giving good ageing properties. It is on a red plastic release liner suitable for die cutting.
Application: Structural bonding in the construction industry. Mounting architectural panels and automotive coachwork for attaching skins to frames.
|Elongation at Break:||1000%|
|180° Peel adhesion:|
|After 30 Mins @ 23ºC||22.0 N/cm|
|After 30 Mins @ -30ºC||17.0 N/cm|
|After 40 Mins @ 80ºC||29.0 N/cm|
|After 24 Hours @ 23ºC||25.0 N/cm|
|Dynamic Shear (200mm/min, 10mm x 10mm)|
|After 30 Minutes @ 80°C||5.0 Kg/cm2|
|After 30 Minutes @ -30°C||4.2 Kg/cm2|
|After 30 Mins @ 23°C in gasoline||3.5 Kg/cm2|
|After 24 Hours @ 23°C||5.4 Kg/cm2|
|After 168 Hours @ 40°C in water||5.2 Kg/cm2|
|Service Temperature:||-30°C to +120°C|
|Shelf Life:||12 Months|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.