Class 2 Reflective Hazard/Safety Warning Tape by Tenacious Tapes. Adhesive tape comparable to Tesa 4169PV1 or Husky 5003 Tape. Order online from exclusive approved supplier Wayout Evacuation Systems.
Colour: Yellow/Black and Red/White Diagonal Stripe
Yellow/Black: 6mm to 1020mm in 10 Metre Lengths
Red/White: 6mm to 450mm in 10 Metre Lengths
Adhesive: Acrylic Solvent
Description: K9650 has backing of yellow/black stripe imprinted film, treated with reflective layer on one side, and coated with strong adhesion acrylic adhesive on the other side.
Application: This tape is the most suitable for hazard indication at construction field, inside warehouse, station or any worksite that is at dark places.
|Elongation at Break:
|Adhesion to Steel:
|-20ºC to 60ºC
Surface Preparation: Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. For other applications the user is fully responsible for evaluating the suitability of the product, and for any risks associated with that use.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.