Pipe Markers – ISO 14726

Regulations

ISO 14726 (2008) Ships and marine technology – Identification colours for the content of piping systems. The chart below shows all the current permutations of identification colours. Please note that this system is not intended to identify medical or industrial gasses and cargos.

Tapes & Marker Dots

Installation

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3-5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Part No. WO-PIPE-01 Category:

Description

Regulations

ISO 14726 (2008) Ships and marine technology – Identification colours for the content of piping systems. The chart below shows all the current permutations of identification colours. Please note that this system is not intended to identify medical or industrial gasses and cargos.

Tapes & Marker Dots

Installation

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3-5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Reviews

There are no reviews yet.

Be the first to review “Pipe Markers – ISO 14726”

Your email address will not be published. Required fields are marked *