Colour: Black, Yellow, Orange, Service Green White and Red.
Roll Size: Widths 6mm to 1300mm in 33 and 66 Metre lengths
Adhesive: Rubber Natural
Description: A conformable building grade PVC tape with good tear and unwind characteristics for both hand and machine application. The special Rubber adhesive coating has low adhesion behaviour and strips cleanly and easily after application after significant periods of time.
Application: Temporary indoor/outdoor protection of metal or hard wood sur-faces during construction and painting/spraying work and pol-ished metal surfaces during manufacturing processes.
|Breaking Load:||26 N/cm|
|Elongation at Break:||140%|
|Adhesion to Steel:||1.60 N/cm|
|Adhesion to Self:||1.70 N/cm|
|Moisture Vapour:||35-55g/m2 per 24 hours|
pH 6.0 to 7.0
|Service Temperature:||-5°C to 60°C|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.