Polyurethane Moulded Bumpers

Colour:  Clear, White and Black

Roll Size:

Shape Gauge Diameter Colour Qty per Sheet
Hemi 1.6mm 6.4mm Clear 576
Hemi 2.2mm 7.0mm Clear 450
Hemi 5.1mm 11.1mm Clear 242
Cylinder 3.5mm 12.7mm C,W,B 200
Square 3.0mm 12.7mm C,W,B 200

Adhesive:  Synthetic Rubber

Description:  A high grade, durable polyurethane whose composition contains no migratory plasticisers. The Bumpers are coated with an aggressive, high grade solvent based synthetic rubber adhesive.

Part No. BPC/BPH/BPS Category: Tags: , , ,

Description

Polyurethane Moulded Bumpers by Tenacious Tapes. Adhesive tape comparable to 3M SJ5012 or 3M SJ5312 C Tapes. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  Clear, White and Black

Roll Size:

Shape Gauge Diameter Colour Qty per Sheet
Hemi 1.6mm 6.4mm Clear 576
Hemi 2.2mm 7.0mm Clear 450
Hemi 5.1mm 11.1mm Clear 242
Cylinder 3.5mm 12.7mm C,W,B 200
Square 3.0mm 12.7mm C,W,B 200

Adhesive:  Synthetic Rubber

Description:  A high grade, durable polyurethane whose composition contains no migratory plasticisers. The Bumpers are coated with an aggressive, high grade solvent based synthetic rubber adhesive.

Application:  Designed for sticking to the base of a wide range of items to stop them slipping and similarly stop them from scratching the surface that the item is resting on. Typical applications include: P.O.S., Exhibition & Display stands, furniture, picture frames, chopping boards, ornaments, keyboards, electrical equipment, (particularly where stacking, to act as spacers). On drawers, doors and handles to cushion impact, reduce noise and minimise damage.

Technical Details:

Adhesive Thickness: 0.05mm
Elongation at Break: 120%
Adhesion to Steel (PSTC-3): 17.8 N/cm
Static Shear (PSTC-07): >300 hrs
Quick Tack – Stainless Steel: 633g/cm²
Service Temperature: -70°C to 260°C
Storage Temperature: 15ºC to 25ºC
Shelf Life: 12 Months

 

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:

The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.

Reviews

There are no reviews yet.

Be the first to review “Polyurethane Moulded Bumpers”

Your email address will not be published. Required fields are marked *