Foam Board Edging Tape

Colour:  Black and White

Roll Size:  9mm to 500mm in 25 Metre Lengths

Adhesive:  Modified Acrylic

Description:  A high grade black 140gsm paper stock with a paper tissue coated modified acrylate adhesive. It has a very good resistance against UV radiation and temperature and a high quality 110gsm PE coated white paper liner.

Part No. KF530 Categories: , ,

Description

Colour:  Black and White

Roll Size:  9mm to 500mm in 25 Metre Lengths

Adhesive:  Modified Acrylic

Description:  A high grade black 140gsm paper stock with a paper tissue coated modified acrylate adhesive. It has a very good resistance against UV radiation and temperature and a high quality 110gsm PE coated white paper liner.

Application:  Designed for applying an aesthetic edge finish to foam board and corrugated cardboard used for the mounting and display of photographic media and advertising.

Technical Details:

Tape Thickness: 0.42mm
Tensile Strength: 90 N/cm
Adhesion to Steel: 9.4 N/cm
Service Temperature: -20ºC to 100ºC


Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  

The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.

Reviews

There are no reviews yet.

Be the first to review “Foam Board Edging Tape”

Your email address will not be published. Required fields are marked *