Double Sided Transfer Tape S1328

Colour:  Translucent

Roll Size:  6mm to 1220mm in 50 Metre Lengths

Adhesive:  Acrylic Modified

Description:  This transfer tape consists of a high performance modified solvent acrylate adhesive with a good resistance to ultraviolet radiation, temperatures, chemicals, solvents and humidity. Its transfer adhesive is extremely durable on metal, varnish and high energy plastics surfaces and is very durable on low energy surfaces. Both sides of the liner are siliconized PE paper, 100 g/m², brown. The Transfer Tape is certified according to UL 969.

Description

Double Sided Transfer Tape by Tenacious Tapes. Adhesive tape comparable to 3M Adhesive Transfer Tape 9482PC or Nitto 8600-13NC. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  Translucent

Roll Size:  6mm to 1220mm in 50 Metre Lengths

Adhesive:  Acrylic Modified

Description:  This transfer tape consists of a high performance modified solvent acrylate adhesive with a good resistance to ultraviolet radiation, temperatures, chemicals, solvents and humidity. Its transfer adhesive is extremely durable on metal, varnish and high energy plastics surfaces and is very durable on low energy surfaces. Both sides of the liner are siliconized PE paper, 100 g/m², brown. The Transfer Tape is certified according to UL 969.

Application:  Ideal as an adhesive medium for foams and materials that require a very high adhesive strength. For adhesion to smooth and slightly rough surfaces with high initial adhesion. Especially recommended for low energy plastic surfaces.

Technical Details:

Tape Thickness: 0.12mm
Adhesive Power: FINAT-TM 1, on stainless steel, one sided covered with 50 microns polyester film.
1 minute: 27 N/25mm
20 minutes: 29 N/25mm
24 hours: 32 N/25mm
Shear Strength: FINAT-TM 8, on stainless steel, one sided covered with 50 microns polyester film.
23°C >100 hours
70°C >1 hour
Application Temperature: >+15°C
Short Term Temperature: +190°C
Service Temperature: -40°C to + 150°C
Shelf Life: 24 Months

 

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:

Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
PAGE

Note:

The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.

Reviews

There are no reviews yet.

Be the first to review “Double Sided Transfer Tape S1328”

Your email address will not be published. Required fields are marked *