Roll Size: 6mm to 1250mm in 40 Metre Lengths
Adhesive: Acrylic Pure
Description: White PVC closed cell foam coated with pressure sensitive pure acrylic adhesive on both sides. Easy remove white silicon coated release liner.
Application: Designed for high shear applications in the automotive, building and construction industries. Due to the high internal strength of foam and high cohesive strength of the adhesive the product will clean-remove from stable surfaces. Ideal for Point of Sale, display and merchandising applications since re-positional and can be used for both permanent and temporary mounting applications.
|180° Peel Adhesion:||4.8 N/cm|
|Static Shear to SSteel:||0.15kg/cm2 500 hr loading|
|Compression to effect a seal:||20%|
|Service Temperature||-40°C to 70°C|
|Storage Temperature||15°C to 25°C|
|Shelf Life:||24 Months at 20°C, 50% RH|
Surface Preparation: The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.
Storage: Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Note: The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.