Double Sided Paper Tape – Golf Grip

Colour:  Cream

Roll Size:  Standard length 33 metres by required width

Adhesive:  Rubber Natural

Description:  Paper with rubber based adhesive on both sides with a white creped silicon release liner.

Description

Colour:  Cream

Roll Size:  Standard length 33 metres by required width

Adhesive:  Rubber Natural

Description:  Paper with rubber based adhesive on both sides with a white creped silicon release liner.

Application:  

1. Main use – for adhering Golf Grips
2. General Purpose
3. Point of Sale

Technical Details:

Tape Thickness: 0.19mm
Liner Thickness: 0.14mm
Breaking Load: 32 N/cm
Adhesion to Steel:

Open Side 2.2 N/cm
Closed Side 2.2 N/cm

Service Temperature: 0ºC to +60ºC
Storage Temperature: 15ºC to 25ºC
Shelf Life: 12 Months


Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  

The above figures represent average values. Actual figures can vary. The selection and
application of a tape is the responsibility of the buyer. Tape should be stored at room
temperature and should not be exposed to sunlight. We reserve the right to make changes
without notice to our products and specifications.

Reviews

There are no reviews yet.

Be the first to review “Double Sided Paper Tape – Golf Grip”

Your email address will not be published. Required fields are marked *