Adhesive Transfer Tape for ATG B313

Colour:  Translucent

Roll Size:  6, 12 & 19mm Widths in 16.5 Metre Lengths NB Special lengths available on 3 Inch cores on request

Adhesive:  Acrylic Modified

Description:  A Transfer tape with solvent acrylic adhesive reinforced with fibreglass with a bi-siliconized honey coloured paper liner 90gsm.

Description

Adhesive Transfer Tape for ATG B313 by Tenacious Tapes. Adhesive tape comparable to 3M Scotch ATG Adhesive Transfer Tape 969, Tesa 4985PV9, Stylus T002. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  Translucent

Roll Size:  6, 12 & 19mm Widths in 16.5 Metre Lengths NB Special lengths available on 3 Inch cores on request

Adhesive:  Acrylic Modified

Description:  A Transfer tape with solvent acrylic adhesive reinforced with fibreglass with a bi-siliconized honey coloured paper liner 90gsm.

Application:  Excellent for adhering pictures into albums, print finishing, book binding, skin pack manufacturing, fixing of labels and general merchandising applications.

Technical Details:

Tape Thickness AFERA 4005: 0.13mm
180º Peel Adhesion AFERA 4001: 15.0 N/cm
Static Shear FTMS mod: >15 Hour
Service Temperature: -10ºC to 100ºC

 

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 30ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.

Reviews

There are no reviews yet.

Be the first to review “Adhesive Transfer Tape for ATG B313”

Your email address will not be published. Required fields are marked *