40 Micron Aluminium Foil Tape

Colour:  Silver

Roll Size:  12mm to 1200mm in 50 Metre Lengths

Adhesive:  Acrylic Emulsion

Description: A 0.04mm (nominal thickness) aluminium foil, coated one side with an acrylic pressure sensitive adhesive, having excellent shear strength particularly at high temperature. The tape is backed with a strong polythene coated release paper.

Description

40 Micron Aluminium Foil Tape by Tenacious Tapes. Adhesive tape comparable to 1433 25MM X 55M ALUM FOIL TAPE, Tesa 4501, Husky 450F, PPC 350 or Nitto P11. Order online from exclusive approved supplier Wayout Evacuation Systems.

Colour:  Silver

Roll Size:  12mm to 1200mm in 50 Metre Lengths

Adhesive:  Acrylic Emulsion

Description: A 0.04mm (nominal thickness) aluminium foil, coated one side with an acrylic pressure sensitive adhesive, having excellent shear strength particularly at high temperature. The tape is backed with a strong polythene coated release paper.

Application:  Heat reflection and screening on electronic equipment. Joining foil-faced glass fibre or rockwool. Sealing cold store insulation, packing refrigerated export containers. Decoration of point of sale media. Sealing double glazing units.

Technical Details:

Tape Thickness: 0.08mm
Breaking Load: 22 N/cm
Elongation at Break: 5%
Adhesion to Steel: 3.8 N/cm
Adhesion after Water Immersion: 3 N/cm
Service Temperature: -20ºC to 110ºC
Application Temperature: 0ºC to 40ºC

 

Specification:  Type test certificate available to show conformance to BS476 Part 6 and Part Class ‘O’ 7 Category 1. Certification to the following standards may be available on request. BS3887 : 1991.

Surface Preparation:  The surface on which the tape is to be used must be clean, dry and free from grease and dust. Remember that pressure sensitive adhesive must be applied with the maximum possible pressure in order to achieve maximum adhesion levels. The recommended application temperature is between 15ºC and 25ºC.

Storage:  Tapes stored below the minimum application temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.

Note:  The above figures represent average values. Actual figures can vary. The selection and application of a tape is the responsibility of the buyer. Tape should be stored at room temperature and should not be exposed to sunlight. We reserve the right to make changes without notice to our products and specifications.

Reviews

There are no reviews yet.

Be the first to review “40 Micron Aluminium Foil Tape”

Your email address will not be published. Required fields are marked *